Quantcast
Channel: Motorcycles Repair Manual Download and Reviews » Search Results » 2000 indian chief problems
Viewing all articles
Browse latest Browse all 10

2000-2001 Aprilia RSV Mille/ SP Power Commander Installation Instructions

$
0
0

download
1 Remove the seat. 2 Lift up the front of the fuel tank. 3 Disconnect the wiring harness from the injector on the left hand side of the bike by pushing up (squeeze) on the spring clips from the injector connector (Fig. A). Plug one of the leads from the PCIII in line of the connectors you just unplugged. 4 Repeat step 3 for the right hand side (Fig. B). 5 Locate the throttle position sensor on the trottle bodies. Locate the yellow wire with the brown tracer coming from the sensor. Connect the wire tap to this wire. Plug the grey wire from the PCIII into this connector (Fig. C). It is recommended to seal this connector with dialectric grease or silicone. Fig. A Fig. B Fig. C 2000-2001 Aprilia RSV Mille / SP- PCIII – Stock connector PCIII connectors PCIII connector Stock connector Wire tap Grey wire from-PCIII 6 Attach the ground wire from the PCIII to the negative side of the battery (Fig. D). 7 Install the PCIII in the rear trunk area of the bike (Fig. E) using the supplied velcro. Make sure to clean both surfaces with alcohol first.

Incoming search terms:


Viewing all articles
Browse latest Browse all 10

Trending Articles